Ec Declaration Of Conformity - ABB MT serie Installations- Betriebs Und Wartungshandbuch

Example of the Declaration of Conformity
given by ABB.
The Manufacturer :-
hereby declares that
The Products :-
are in conformity with provisions of the following Council Directives :
Low Voltage Directive 73/23/EEC (amended by 93/68/EEC),
and, as components, with the essential requirements of the following :
EMC Directive 89/336/EEC (amended by 92/31/EEC and 93/68/EEC), regarding the intrinsic
characteristics to emission and immunity levels,
and are in conformity with :
EN 60 034-1
Additional Information :-
By design, the machines, considered as components, comply with the essential requirements of
Machinery Directive 98/37/EEC provided that the installation be correctly realised by the manufacturer
of the machinery (for example : in compliance with our Installation Instructions and EN 60 204 "Electri-
cal Equipment of Industrial Machines").
Certifi cate of Incorporation (Directive 98/37/EEC, Art 4.2 and Annex II, Sub B) :
The machines above must not be put into service until the machinery into which they have
been incorporated have been declared in conformity with the Machinery Directive.
Year of CE marking : CE00.
Signed by ..................................................
Title ...........................................................
Date ..........................................................
Translations into other languages are available from ABB.
GB –
2

EC Declaration of Conformity

(Name and address of the manufacturer)
(Product identification)
ABB / Low Voltage Motors / Manual 12-2004