Preparation - Pari LC Sprint Serie Gebrauchsanweisung

EN
Like all plastic parts, nebulisers of the PARI LC SPRINT family are suscepti-
ble to a certain degree of wear when they are used and reprocessed fre-
quently. Over time, this can cause a change in the aerosol, which in turn
impairs the therapeutic efficiency.
You should replace the nebuliser at least once a year. For this purpose, PARI
GmbH can offer you the useful PARI Year Pack (see Chapter 9 "Replace-
ment sets, replacement parts and accessories").
Additionally please read and follow the hygiene instructions in the
instructions for use of the PARI compressor.

6.2 Preparation

Directly after each treatment, all parts of the PARI LC SPRINT nebuliser must
be cleaned of medication residue and contamination. To do this, dismantle
the nebuliser into its individual parts (as described in the following, see
figure A).
• Detach either the mouthpiece (2) or the BABY bend (3) and the BABY
mask (4) from the nebuliser.
• Unscrew the nebuliser.
• Remove the nozzle attachment (1b) from the nebuliser lower section (1c).
• Open the cap on the nebuliser upper section (1a).
For hygienic re-use at home please continue to read starting with the follow-
ing section.
For hygienic re-use in the hospital or medical practice, please read
Chapter 6.4 "Hospital and medical practice".
33