Correct Handling Of The Battery Charger - Parkside RAPIDFIRE 2.0 Originalbetriebsanleitung

GB IE NI
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and the
manufacturer of their medical im-
plant before operating the machine.
Correct handling of the
battery charger
• This device can be used by chil-
dren aged 8 and over and by
people with reduced physical,
sensory or mental capacities
or with a lack of experience or
knowledge, if they are supervised
or have been instructed regarding
safe use of the device and under-
stand the resulting risks. Children
are not permitted to play with the
device. Cleaning and user main-
tenance are not to be undertaken
by children without supervision.
• To charge the battery, use
only the charger supplied.
Risk of fire and explosion. This en-
sures that the safety of the device
is maintained.
• Before each use, check the
charger, cable and plug
and have them repaired by
qualified professionals and
only with original parts. Do
not use a defective charger and
do not open it up yourself. This en-
sures that the safety of the device
is maintained.
10
CY
• Connect the charger only to
a socket with an earth. En-
sure that the mains voltage
matches the specifications
on the charger rating plate.
Risk of electric shock.
• Disconnect the charger from
the mains before closing or
opening connection to the
battery / power tool / de-
vice.
• Keep the charger clean and
away from wet and rain.
Do not use the charger
outdoors. Dirt and the entry of
water increase the risk of electric
shock.
• Operate the charger only
with the appropriate origi-
nal batteries. Charging other
batteries may result in injuries and
risk of fire.
• Avoid mechanical damage
to the charger. This can result
in internal short circuits.
• Do not operate the charger
on a combustible surface
(e.g. paper, textiles). Risk of
fire due to heating during charg-
ing.
• If the power cable for this equip-
ment is damaged, it must be re-
placed by the manufacturer, a cus-
tomer service agent of the same
or a similarly qualified person in
order to prevent hazards.