Herunterladen Inhalt Inhalt Diese Seite drucken

Correct Handling Of The Battery Charger; Charging Process - Parkside PSSA 3.6 C3 Betriebsanleitung

Vorschau ausblenden Andere Handbücher für PSSA 3.6 C3:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

GB
IE
CY
Correct handling of the bat-
tery charger
This appliance can be used by
a)
persons with reduced physical,
sensory or mental capabili-
ties or lack of experience and
knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved. Children
shall not play with the appli-
ance.
Do not use the charger to
b)
charge non-rechargeable batter-
ies.
c) To charge the battery, use only
the charger supplied. Risk of fire
and explosion. This ensures that the
safety of the device is maintained.
d) Before each use, check the
charger, cable and plug and
have them repaired by quali-
fied professionals and only with
original parts. Do not use a de-
fective charger and do not open
it up yourself. This ensures that the
safety of the device is maintained.
e) Connect the charger only to a
socket with an earth. Ensure
that the mains voltage matches
the specifications on the charger
rating plate. Risk of electric shock.
f) Disconnect the charger from the
mains before closing or open-
ing connection to the battery /
power tool / device. This ensures
that the battery and charger are not
damaged.
g) Keep the charger clean and
away from wet and rain. Do not
use the charger outdoors. Dirt
10
and the entry of water increase the risk
of electric shock.
h) Operate the charger only with
the appropriate original batter-
ies. Charging other batteries may result
in injuries and risk of fire.
i)
Avoid mechanical damage to the
charger. This can result in internal
short circuits.
j)
Do not operate the charger on a
combustible surface (e.g. paper,
textiles). Risk of fire due to heating
during charging.
k) In order to minimise the risk of
electric shock, pull the charger
plug out of the socket prior to
cleaning it.
l)
If the power cable for this equip-
ment is damaged, it must be
replaced by the manufacturer,
a customer service agent of the
same or a similarly qualified per-
son in order to prevent hazards.

Charging process

Do not expose the battery to
extreme conditions such as
heat and impact. There is a
risk of injury from leaking
electrolyte solution! In case
of contact, rinse with water
or neutraliser and consult a
doctor if contact has occurred
with eyes etc.
Charge the battery only in dry
areas.
There is a risk of injury from
electric shock.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis