Display And Delete Measured Values; Blood Pressure Monitor - Beurer BM 54 Gebrauchsanweisung

rest for 5 minutes beforehand and do not speak or move during
the measurement. If the symbol
consult your doctor.
Self-diagnosis and treatment based on the measurements can
be dangerous. Always follow your GP's instructions.
Risk indicator:
The measurements can be classified and evaluated in accordance
with the following table.
However, these standard values serve only as a general guideline,
as the individual blood pressure varies in different people and
different age groups etc.
It is important to consult your doctor regularly for advice. Your
doctor will tell you your individual values for normal blood pres-
sure as well as the value above which your blood pressure is
classified as dangerous.
The classification on the display and the scale on the unit show
which category the recorded blood pressure values fall into. If
the values of systole and diastole fall into two different catego-
ries (e.g. systole in the 'High normal' category and diastole in
the 'Normal' category), the graphical classification on the device
always shows the higher category; for the example given this
would be 'High normal'.
Blood pressure Systole
value category (in mmHg)
Setting 3:
severe ≥ 180
hypertension
appears frequently, please
Diastole
Action
(in mmHg)
seek medical
≥ 110
attention
Blood pressure Systole
value category (in mmHg)
Setting 2:
moderate 160 – 179 100 – 109
hypertension
Setting 1:
mild 140 – 159 90 – 99
hypertension
High normal 130 – 139 85 – 89
Normal 120 – 129 80 – 84
Optimal < 120
Source: WHO, 1999 (World Health Organization)

7. Display and delete measured values

The results of every successful measurement are stored
together with the date and time. The oldest measurement
is overwritten in the event of more than 60 measurements.
• Select the desired user memory (
M2 memory buttons if the device is switched off.
• To view the measurement data for user memory , press
the M1 memory button.
• To view the measurement data for user
memory , press the M2 memory button.
• The average of all measurements appears
on the display.
27
Diastole
Action
(in mmHg)
seek medical
attention
regular monitoring
by doctor
regular monitoring
by doctor
self-monitoring
< 80 self-monitoring
) with the M1 or