Display And Delete Measured Values - Beurer BM 57 Gebrauchsanweisung

Blood pressure Systole
value category (in mmHg)
Setting 3:
severe ≥ 180
hypertension
Setting 2:
moderate 160 – 179 100 – 109
hypertension
Setting 1:
mild 140 – 159 90 – 99
hypertension
High normal 130 – 139 85 – 89
Normal 120 – 129 80 – 84
Optimal < 120
Source: WHO, 1999 (World Health Organization)
Diastole
Action
(in mmHg)
seek medical
≥ 110
attention
seek medical
attention
regular monito-
ring by doctor
regular monito-
ring by doctor
self-monitoring
< 80 self-monitoring

7. Display and delete measured values

The results of every successful measurement are stored
together with the date and time. The oldest measurement
is overwritten in the event of more than 60 measure-
ments.
• Select the desired user memory (
or M2 memory buttons if the device is switched off.
– To view the measurement data for user memory ,
press the M1 memory button.
– To view the measurement data for user memory ,
press the M2 memory button.
• The average of all measurements appears on the dis-
play.
• If Bluetooth is activated (the symbol will flash on the
®
display), the blood pressure monitor is attempting to
connect to the app. If you press the M1 button in the
meantime, the transfer will be cancelled and the morning
average will be displayed.
• If you press the M2 button, the transfer
is cancelled and the measurement data
of user memory
symbol is no longer shown. The buttons
are deactivated as soon as a connection is
established and the data is transferred.
29
) using the M1
is displayed. The
•