Technical Data - Parkside PKGA 20-Li A1 Originalbetriebsanleitung

GB IE

Technical Data

4-in-1 Cordless
combination tool .....................PKGA 20-Li A1
Motor voltage .............................. 20 V
) ....................21000 min
Idling speed (n
0
Motor unit with drill attachment ..............PKGA1
) ........ 0-400/0-1350 min
Idling speed (n
0
Torque .................................max. 25 Nm
Spread drill chuck ................... 1.0-10 mm
Drill diameter
for wood .......................... max. 10 mm
for steel ............................. max. 8 mm
Weight (without charger) ................1.5 kg
Sound pressure level (L
Sound power level (L
)
Vibration (a
h
drilling in metal .....1.322 m/s
drilling in wood ....1.531 m/s
Motor unit with multisander attachment ..PKGA2
Oscillation rate (n
0
Sanding sheet size
Weight (without charger) ................1.4 kg
Sound pressure level (L
Sound power level (L
) .......4.572 m/s
Vibration (a
h
Motor unit with sabre saw attachment ....PKGA3
) .....................0-3200 min
Stroke rate (n
0
Stroke length
Weight (without charger) ................1.8 kg
Sound pressure level (L
Sound power level (L
)
Vibration (a
h
Sawing boards ................. 12.395 m/s
Sawing wood beams ........ 12.392 m/s
28
) ......... 83.7 dB(A)
pA
K=3 dB
) ........... 94.7 dB(A)
WA
K=3 dB
, K=1.5 m/s
2
2 , K=1.5 m/s
) ..............0-9000 min
.......138 x 97 mm
) ......... 88.6 dB(A)
pA
K=3 dB
) .99.6 dB(A), K=3 dB
WA
, K=1.5 m/s
2
...................... 22 mm
) ........ 89.3 dB(A),
pA
K=3 dB
) ......... 100.3 dB(A)
WA
K=3 dB
K=1.5 m/s
Motor unit with multifunction tool ...........PKGA4
Oscillation rate (n
Oscillation angle ..............................3.0°
Weight (without charger) ................1.4 kg
Sound pressure level (L
-1
Sound power level (L
) ....... 4.229m/s
-1 Vibration (a
h
Battery (Li-Ion) ........................... PAP 20 A1
Battery cells ........................................ 5
Nominal voltage .......................... 20 V
Capacity ...................................... 2.0 Ah
Charging time ...................... approx. 1 h
Recharger ................................. PLG 20 A1
Nominal consumption .....................65 W
Voltage input ............. 230-240 V~, 50 Hz
Voltage output .................. 21.5 V
Protection class ..................................
2
2 Protection category ...........................IPX0
The stated vibration emission value was
-1 measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
2
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
-1
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
2 working hours. For this purpose all
parts of the operating cycle have to
2
2
) ............0-20000 min
0
) ........ 84.8 dB(A),
pA
) ........... 95.8 dB(A)
WA
2 , K=1.5 m/s
-1
K=3 dB
K=3 dB
2
2.4 A
II