Switching On And Off; Maintenance And Cleaning; Topping Up The Oil; Replacing The Carbon Brushes - Parkside PAH 1700 A1 Originalbetriebsanleitung

Switching on and off

During operation, you can choose between instan-
taneous and continuous operation .
Switching to instantaneous operation:
♦ Press the ON/OFF switch
Switching off instantaneous operation:
♦ Release the ON/OFF switch
Switching to continuous operation:
♦ Press the ON/OFF switch
position with the locking switch
Switching off continuous operation:
♦ Press the ON/OFF switch
again .

maintenance and cleaning

WArnInG! rISk of Injury! Switch
off the appliance and pull out the
power plug before starting any work
on the appliance.
■ The handles, ventilation slots and the motor
housing must always be kept clean, dry and
free from oil or grease .
■ Use a soft, dry cloth to clean the housing .
■ Make sure that the ventilation slits are not
obstructed .
■ Clean the tool holder
♦ Before fitting a tool into the tool holder
grease it lightly .
WARNING!
► If the cord of the power tool is damaged, it
must be replaced with a specially designed
cord that can be purchased through our
Customer Service .
NOTE
► Replacement parts not listed (such as switch-
es) can be ordered via our service hotline .
PAH 1700 A1
.
.
and lock it in this
.
and release it
regularly:
,

Topping up the oil

NOTE
► Before operating the appliance, check
whether there is enough oil in the appliance
(see section "Checking the oil level") .
Operation without sufficient oil will cause
irreparable damage to the appliance .
If you have ascertained that there is no oil in the oil
inspection window , you need top up the oil:
♦ Lay the appliance on a flat surface with the oil
inspection window
♦ Use the supplied assembly wrench
remove the oil inspection window
housing .
♦ Pour the oil with help from the oil bottle
the opening until it is 1 cm below the lip .
♦ Replace the oil inspection window
screw it tight using the assembly wrench
Check the fill level as described in the section
"Checking the oil level" .

Replacing the carbon brushes

NOTE
► Have the carbon brushes replaced by the
manufacturer, Customer Service or a similarly
qualified person .

Disposal

The packaging is made of environmentally
friendly material and can be disposed of
at your local recycling centres .
Do not dispose of power tools in
your normal domestic waste!
European Directive 2012/19/EU requires that
worn-out power tools be collected separately and
recycled in an environmentally compatible manner .
Your local community or municipal authorities can
provide information on how to dispose of the worn-
out appliance .
facing upwards .
to
from the
into
and
.
GB │ IE │ 19 ■