Setting The Slave Group; Testing Remote Flash Mode - Metz mecablitz 64 AF-1 digital Bedienungsanleitung

10.2.3 Setting the slave group

Gr Ch
REMOTE
SLAVE A 2
• Press the sensor button on the touch
M-
display for the channel group
A I CH2
Zoom 35 m
(e.g.
m
the channel and group appears.
O
SLAVE
• Press the sensor button on the touch
CHANNEL
display for the group
GROUP
O
GROUP
• Press the
touch display to select the desired group
GROUP A
"A", "B" or "C".
GROUP B
GROUP C
• Press the sensor button on the touch
p
q
display for the selected group, e.g.
Gr Ch
REMOTE
SLAVE B 2
M-
The setting will take effect immediately. "B"
m
Zoom 35
m
appears on the display.
). The window for selecting
GROUP
.
sensor buttons on the
GROUP B
.

10.3 Testing remote flash mode

• Place the slave flash units in the desired
positions for the shot. Use flash unit
mounting foot S60 (optional accessories)
to set up the slave flash unit.
• Wait for all of the flash units involved to
become flash ready. Once the slave flash
units are flash ready, the AF auxiliary ligh
will blink.
• Press the manual firing button
master flash unit to fire a test flash.
The slave flash units will respond in
succession, according to slave group,
with a test flash. If a slave unit fails to fire
a test flash, check the settings for remote
channel and slave group. Correct the
position of the slave flash unit so that it is
able to receive light from the master flash
unit via the sensor .
The flash mode is transmitted automatically
by master.
When the flash unit functions as master in
the cordless remote system, the activation
of the modelling light also activates the
modelling light of slave flash units.
on the
k
193