Switching-Off Servo Flash Mode - Metz mecablitz 64 AF-1 digital Bedienungsanleitung

Setting procedure for the learn function
SYNC
M-Servo
The AF pre-flash function of the camera must
be switched off.
M-
Zoom 35 m
m
• Press the
P
1/16
O
SYNC
• Press the
LEARN
• "Learning Mode" is ready to learn.
• Press the release button on the camera so
k
The macablitz digital has learned the flash of
the camera flash unit.
196
SYNC
sensor buttons on the
touch display as many times as it takes for
the selection to appear.
Learn
sensor button on the touch
display.
that the camera's own flash unit is
activated.
If the SERVO flash unit has received a light
pulse, then "LEARN OK" appears in the
display as confirmation.

10.4.5 Switching-off SERVO flash mode

SYNC
• Press the displayed mode of operation on
M-Servo
the touch display as many times as it takes
for the display for selecting the mode of
M-
operation to appear.
Zoom 35 m
m
P • Press the
1/16
touch display and select the desired mode
of operation, e.g.
O
MODE
TTL
A
• Press the sensor button on the touch
p
q
display for the mode of operation, e.g.
TTL
The selected mode of operation is adopted.
0.6- 7.2 m
M-
5,6
m
35
Zoom F
m
EV
sensor buttons on the
TTL
.
TTL
.