Carry Out Work In A Safety Conscious Manner; Unilateral Modification And Spare Parts Manufacturing; Unproven Usage - Conel FLOW 30 series Betriebsanleitung

Scope of delivery / Application / Materials

1.2 Carry out work in a safety conscious manner

The safety instruction listed in this operating manual, the existing National Regulations
for safety, as well as any internal operating or safety regulations which apply in the
user's own premises must be observed.
Safety Regulations for the Owner/Operator
All dangers due to electricity must be avoided (for details consult the regulations of your
local Electricity Supply Company).
Safety Regulations for maintenance, inspection and installation work
The user of the unit should ensure that all maintenance, inspection or installation work
is carried out by authorised and qualified skilled personnel. The user must also make
certain that they have carefully studied the operating instructions. In principle all work
on the unit should only be carried out while it is stationary. Pumps or units used for
pumping of fluids which could be injurious to health must be decontaminated.
After completion of the work, all safety and protective devices must be refitted and
a check should be made that they are fully functional. Before starting up again, the
points listed in this operating instructions should be complied with.

1.3 Unilateral modification and spare parts manufacturing

Modifications or changes to the unit/installation should only be carried out after
consultations with the manufacturer. Original spare parts and accessories authorised
by the manufacturer are essential for compliance with safety requirements. The use of
other parts can invalidate any claims for warranty or compensation.

1.4 Unproven usage

The operating safety of the unit is only guaranteed provided that the unit is used in
accordance with these operating instructions. The limit values given hereafter
should under no circumstance be exceeded. These operation instructions do not
supersede or exclude the following of generally valid regulations and standards.
18