Carry Out Work In A Safety Conscious Manner - Conel FLOW Betriebsanleitung

Hints in the operating instructions / Carry out work in a safety conscious manner
Dangers which could arise due to non-observance of safety instructions
The non-observance of the safety instructions can lead to both danger to personnel
and also to possible harm to the environment or the unit itself. Non-observance of
the safety instructions can invalidate the rights of the user to any compensation or
regress.
In detail, non-observance can for example result in the following dangers:
>
Failure of important functions of the unit/installation.
> Danger to personnel by electrical, mechanical or chemical influences.
>
Danger to the environment by leakage of dangerous substances.

1.2 Carry out work in a safety conscious manner

The safety instruction listed in this operating manual, the existing National Regulati-
ons for safety, as well as any internal operating or safety regulations which apply
in the user's own premises must be observed.
Safety Regulations for the Owner/Operator
All dangers due to electricity must be avoided (for details consult the regulations of
your local Electricity Supply Company).
Safety Regulations for maintenance, inspection and installation work
The user of the unit should ensure that all maintenance, inspection or installation
work is carried out by authorised and qualified skilled personnel. The user must
also make certain that they have carefully studied the operating instructions. In
principle all work on the unit should only be carried out while it is stationary. Pumps
or units used for pumping of fluids which could be injurious to health must be
decontaminated.
After completion of the work, all safety and protective devices must be refitted and
a check should be made that they are fully functional. Before starting up again, the
points listed in this operating instructions should be complied with.
16