Switching The Leds On And Off; Constant Lighting In One Color Or In Multicolor; Selecting An Effect Program - EuroLite LED IP STRIP SET 270 Bedienungsanleitung

Switching the LEDs on and off

The LEDs can be switched on with the button
control unit remains switched on. After switching on, the LEDs light up according to the last control program
selected.

Constant lighting in one color or in multicolor

1
For constant lighting of the red, green or blue LEDs, press the corresponding color button
B .
2
If you press one of the other color button, a further color lights up in addition to the basic color selected
3
For constant lighting of all red, green and blue LEDs, press the button
4
Use the buttons

Selecting an effect program

Effect programs are selected with the corresponding buttons. When selecting a program, the speed is
adjusted to maximum at the same time. Use the buttons
levels are available.
Button Programs with variable speed
FLASH
Chaser 1
STROBE
Color Change 1
FADE
Chaser 2
SMOOTH
Color Change 2
ON
and to adjust the brightness. 9 levels are available.
14/15
and switched off with the button
W
and to adjust the running speed. 9
OFF
. However, the
R
,
.
00075765.DOCX Version 1.0
G
or