Switching the LEDs on and off
The LEDs can be switched on with the button ON and switched off with the button OFF. However, the control
unit remains switched on. After switching on, the LEDs light up according to the last control program selected.
Constant lighting in one color
For constant lighting of all LEDs in one color, press the corresponding color button. Use the buttons
to adjust the brightness. 9 levels are available.
Selecting a control program
Control programs are selected with the corresponding buttons. When selecting a control program, the speed
is adjusted to maximum at the same time. Use the buttons
available.
Button
Programs with variable speed
Flash
Color switching between red Q yellow Q green Q turquoiseQ blue Q magenta Q white
Strobe
Strobe effect white
Fade
Color fading between red Q yellow Q green Q turquoiseQ blue Q magenta Q white
Smooth
Color switching between red Q green Q blue
and
to adjust the running speed. 9 levels are
12/13
and
00062139.DOC Version 1.2