Sound control
LEDs on/off
Fade
ON OFF
Auto
Sound
-
Speed
R
G
RG
RB
Static on
W
RGB
Switching the LEDs On and Off
The LEDs can be switched on and off with the button
however. After switching on, the LEDs light up according to the last control program selected.
Choosing a control program
You can choose the desired program via the corresponding buttons. Speed and fine control can be selected
-
+
via the
and
buttons.
Button
W
LEDs static on; brightness adjustable via -/+ buttons. 22 levels are available.
Flash
Strobe effect; speed adjustable via -/+ buttons. 20 levels are available.
Sound
Sound control; sensitivity adjustable via -/+ buttons. 32 levels are available.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device except for the fuse. Maintenance and service operations are
only to be carried out by authorized dealers.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
M
Flash
Strobe effect
+
„-/+" for adjusting control
program settings
B
GB
RGBW
Control programs with variable settings
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
. The control unit remains switched on,
ON OFF
15/16
00082042.DOC, Version 1.0