Herunterladen Inhalt Inhalt Diese Seite drucken

Disposal - Kessel EasyClean ground Standard NS 25 Anleitung Für Einbau, Bedienung Und Wartung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

7. Disposal

The chapter 'Safety instructions' must be heeded.
Important - a proper and timely disposal of the separator
insures that the system operates properly and as designed.
Grease separator disposal work should be handled by a
licensed disposal company. Disposal of the separator
should take place during off hours as a separator with open
covers will release unpleasant odours.
Disposal should take place before the storage capacity of
the sludge collection area (which is half of the sludge sto-
rage volume) and the grease collection area are exceeded.
Under normal circumstances a monthly complete disposal
as well as internal cleaning of the separator is sufficient.
After disposal and cleaning, the separator should be com-
pletely filled (to outlet level) with water. In the case that large
volumes of sludge or grease are collected quickly inside
the separator, the disposal intervals should be shortened
accordingly.
010-223
Disposal
The following measures should be taken when disposing a
grease separator:
- Complete disposal and internal rinsing/cleaning of the
separator
- Automated separators with disposal and cleaning systems
should be checked for proper system operation.
- Any remaining solids, debris or deposits should be remo-
ved.
- Cleaning of the odour tight cast iron manhole covers as
well as inspection of the cover's sealing gasket.
- If a sampling chamber is present, it should also be sprayed
down and cleaned.
- After disposal and cleaning is complete the entire separa-
tor should be completely refilled with water.
Disposal
Loosen the locking bolts on the separator's manhole cover-
(s) using the included hand tool
• Remove the manhole cover(s)
• Insert vacuum disposal hose from the disposal vehicle
to the base of the separator to take out entire contents.
• Spray down interior of separator and remove any solids
or deposits.
• Completely fill separator with water.
• Replace manhole cover(s) - check condition of manhole
cover and gasket.
• Tighten bolts on manhole cover(s)
• Enter disposal date and information in log book.
28/96
2019/02

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis