Installation
4.1.2 Transportation and storage
Note the following points:
• Pack the device so that is protected against impact for storage and transportation. The
original packaging provides optimum protection.
• The permitted storage temperature range is -40 to +80°C (-40 to +176 °F); it is possible to
store the device in the limit temperature ranges for a limited period (maximum 48 hours).
4.2
Installation conditions
The process indicator is designed to be used in the field.
The orientation is determined by the readability of the display. Cable entries are located on the
bottom of the device.
Operational temperature range:
-40 to +80 °C (-40 to +176 °F)
NOTICE
Shorter display operating life at higher temperatures
‣
Where possible do not operate the device in the higher temperature range.
The display may react slowly at temperatures below -20 °C (-4 °F).
Readability of the display cannot be guaranteed at temperatures below -30 °C (-22 °F).
4.2.1 Dimensions
132 (5.2)
112 (4.4)
166 (6.5)
Fig. 2: Installation dimensions; dimensions in mm (dimensions in inches in brackets)
4.2.2 Installation location
Information on conditions that must be present at the installation location to mount the device
correctly can be found in Section ' T echnical data' . These include the ambient temperature,
degree of protection, climate class etc.
36
106 (4.2)
RID14
121 (4.8)
a0011152
Endress+Hauser