Technical Data - Siemens SIPART PS2 Zusatzbeschreibung

Technical Data

General data
Lifting range (thrust drive)
Angle of rotation (swivel drive)
Assembly
•
on thrust drive
•
on swivel drive
Degree of protection
Installation position
CE mark
EMC requirements
Vibration strength
•
Harmonic oscillations (sine)
acc. to DIN EN 60082-2-
6/05.96
•
Oscillation (sinusoidal)
acc. to DIN EN 60068-2-
6/04.95
•
Oscillation (sinusoidal) acc. to
DIN EN 60068-2- 6/04.95
SIPART PS2 Zusatzbeschreibung
A5E00151589-04
Zusatzbeschreibung / Additional Specification
19" module rack
Front: IP 40 acc. to EN 60 529
Rear: IP 20 acc. to EN 60 529
any
Conformity with regard to EMC
regulation 89/336 EEC in agreement
with following standards
EN 61326 A1 app. A1 and
Namur NE21 August 98
3.5mm (5 to 8.4 Hz) 4 cycles/axis
10 m/s² (8.4 to 500Hz) 4 cycles/axis
KWU DD 7080.9/83
KTA 3503 of 11.86
Device – 6DR5910-0NG00-0AA0
3 to 130mm (angle of rotation of the
feedback shaft 16 to 90°)
30 to 100°
via add-on kit 6DR4004-8V and poss.
additional lever arm
6DR4004-8L to drives according to
IEC 534-6 (NAMUR) with rib, pillars
or plane surface
via add-on kit 6DR4004-8D to drives
with fastening level according to
VDI/VDE 3845 and DIN 3337;
The necessary add-on console must be
provided on the drive side. Shaft
groove and internal thread M6.
IP 65 acc. to EN 60 529 / NEMA4x
any in wet environment pneumatic
connections and exhaust air opening
not at top
Conformity with regard to EMC
regulation 89/336 EEC in agreement
with following standards
EN 61326 A1 app. A1 and
Namur NE21 August 98
3.5mm (2 to 27Hz) 3 cycles/axis
98.1 m/s² (27 to 300Hz) 3 cycles/axis
6
47