Herunterladen Inhalt Inhalt Diese Seite drucken

Indications Of Pc-Arfpe In Normal Condition - Hitachi RCIM-1.0FSN4 Installations- Und Betriebshandbuch

Indoor units system free 4-way cassette
Vorschau ausblenden Andere Handbücher für RCIM-1.0FSN4:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 95
Remote controller operation

6.2 INDICATIONS OF PC-ARFPE IN NORMAL CONDITION

1 Central Control
"Central Control" is turned ON.
In case that the prohibiting operation with remote control
switch is set by the central controller, operation, temperature
setting, fan speed and direction setting are not available
from the remote control switch.
A/C
Meeting Room
MODE SPEED LOUV.
HEAT
MED
Central Control
2 Motion Sensor Control
"Motion sensor is activated" is turned ON during the motion
sensor control. In this case, the operation is performed with
saving the capacity or stopped by the motion sensor control.
A/C
Meeting Room
MODE SPEED
HEAT
MED
Motion sensor is activated
LOUV.
Turned ON
3 Defrost
Defrosting operation
"DFR" is turned ON and the indoor fan stops during
defrosting operation. The louvre is fixed in a horizontal
position.
A/C
Meeting Room
MODE SPEED LOUV.
HEAT
MED
DFR
LOUV.
Turned ON
Operation stoppage during defrosting operation
If the unit operation is stopped during defrosting operation,
the operation continues with the RUN indicator (Green)
turned OFF. The operation stops after defrosting operation.
8
PMML0363A rev.2 - 08/2016 - P5416559
TEMP
Turned ON
LOUV.
TEMP
ADJ
TEMP
ADJ
4 Operation Control
Supplying Main Electrical Power
"HOT-ST" is turned ON at power-on.
In this case, the compressor is under preheating. Do not
turn OFF the power supply of the outdoor unit during the
high season for Cooling/Heating operation. Otherwise, the
operation might not be available for Max. 4 hours.
Meeting Room
A/C
MODE SPEED
HEAT
MED
HOT-ST
LOUV.
Turned ON
During Hot Start (for Heating Operation Only)
"HOT-ST" is turned ON.
A/C
Meeting Room
MODE SPEED
HEAT
MED
HOT-ST
LOUV.
Turned ON
Different Operation Modes
When the operation mode set by the remote control switch
is different from the outdoor unit operation mode, the actual
operation mode flashes on the LCD (except for the heat
recovery system models).
A/C
MODE SPEED
COOL
HEAT
LOUV.
Flashing
The above display shows the case that the cooling mode
is set from the remote control switch while actual operation
mode of the outdoor unit is heating.
TEMP
ADJ
LOUV.
TEMP
ADJ
Meeting Room
LOUV.
TEMP
MED
ADJ

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis