Hitachi RCIM-1.0FSN4 Installations- Und Betriebshandbuch Seite 17

Remote controller operation

Setting of motion sensor
1 Press " " (menu).
Select "Motion Sensor Setting" from the menu by pressing " "
or " " and press "OK".
OK
OK
2 "Motion Sensor Setting" is displayed.
The highlighted item is shifted to "Sensor", "If absent" and
"Check interval" by pressing " " or " ".
OK
To set "Sensor", move to procedure (3).
To set "If absent", move to procedure (5).
To set "Check interval", move to procedure (7).
3 Press " " or " " and select "Sensor".
OK
4 The display is switched "ON" and "OFF" in order by pressing
" " or " " and change the setting.
If other settings are not required, move to procedure (9).
OK
5 Press " " or " " and select "If absent".
OK
7 PMML0363A rev.2 - 08/2016 - P5416559
15:10(Fri)
Menu
Louver Setting
Louver Open/Close
02
VENTI
/
Total Heat Exchanger SET 03
Motion Sensor Setting
SEL. ENT. RTN.
OK
Motion Sensor Setting
Sensor
ON
If absent Running
Check interval
30MIN
SEL. ADJ OK ENT. RTN.
Motion Sensor Setting
Sensor
ON
If absent
Running
Check interval
30MIN
SEL. ADJ OK ENT. RTN.
Motion Sensor Setting
Sensor
ON
If absent
Running
Check interval
30MIN
SEL. ADJ OK ENT. RTN.
Motion Sensor Setting
Sensor
ON
If absent
Running
Check interval
30MIN
SEL. ADJ OK ENT. RTN.
6 The display is switched "Running", "Stand-by" and "Stop" in
order by pressing " " or " " and change the setting.
If other settings are not required, move to procedure (9).
OK
7 Press " " or " " and select "Check interval".
OK
8 The display is switched "30MIN", "60MIN", "90MIN",
"120MIN" and "180MIN" in order by pressing " " or " " and
change the setting.
If other settings are not required, move to procedure (9).
OK
9 Press "OK" after the setting is completed.
The confirmation screen will be displayed.
Select "Yes" by pressing " " or " " and press "OK". The
motion sensor setting will be confirmed and the screen will
return to the normal mode (operation mode indication).
OK
OK
OK
Motion Sensor Setting
Sensor
ON
If absent Running
Check interval 30MIN
SEL. ADJ ENT. RTN.
OK
Motion Sensor Setting
Sensor
ON
If absent
Running
Check interval 30MIN
SEL. ADJ OK ENT. RTN.
Motion Sensor Setting
Sensor
ON
If absent Running
Check interval 30MIN
SEL. ADJ ENT. RTN.
OK
Motion Sensor Setting
Save changes?
Yes No
SEL. OK ENT. RTN.
Meeting Room
A/C
MODE SPEED LOUV. TEMP
HEAT
MED
Motion Sensor is activated
LOUV. ADJ