Storage - Cleanmaxx VL-621E-A Gebrauchsanleitung

EN
5. Insert the foam fi lter into the fi lter holder.
6. Reinsert the fi lter holder and fi rmly press it down.
7. Insert the dust container into the device (see "Inserting the Dust Container into the
Device").
Cleaning the HEPA Exhaust Air Filter
The HEPA exhaust air fi lter is located behind the exhaust air hatch on the back of the
vacuum cleaner.
E
4. Brush or wipe out the fi lter compartment if necessary.
5. Insert the HEPA exhaust air fi lter into the fi lter compartment and press it down fi rmly.
6. Insert the exhaust air hatch into the fi lter compartment. When you do this, make sure
that the locking lugs on the bottom of the exhaust air hatch sit correctly in the recess-
es in the fi lter compartment. You must hear and feel the exhaust air hatch engage.
Cleaning the Housing and Nozzles
• Clean the housing with a slightly damp, soft cloth if necessary.
• Regularly remove hair and fl uff from the nozzles.

Storage

• For storage purposes, hook the fl oor nozzle into the holder on the back of the device
(see illustration) and collapse the telescopic tube as far as possible.
• Store the vacuum cleaner in a cool, dry indoor room out of the reach of children and
animals.
1. Press both release buttons (D) of the exhaust air hatch.
D
The exhaust air hatch drops out.
2. Remove the HEPA exhaust air fi lter by pressing the lock-
ing catch (E) towards the fi lter and pulling it out at the
same time.
3. Tap out the HEPA exhaust air fi lter. Brush off with a soft
brush if necessary.
IMPORTANT: Do not clean the HEPA exhaust air fi lter
with water!
22