Scheppach Molda 5.0f Originalbetriebsanleitung Seite 31

Manufacturer:
Scheppach Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen / BRD
Dear customer,
We wish you a pleasant and successful working experience with your new spindle moulder.
NOTE:
In accordance with the applicable product liability law, the manufacturer of this machine is not liable for
damage which arises on or in connection with this machine in case of:
 Improper handling
 Non-compliance with the operating instructions
 Repairs by third-party, non-authorised technicians
 Installation and replacement of "non-original spare parts"
 Non-compliance with the "intended use"
 Outages of the electrical system due to non-compliance with the electrical specifications and VDE
regulations EN 60204-1
Recommendations:
Read the entire text of the operating instructions prior to assembly and operation of the machine.
These operating instructions are intended to familiarise you with the machine and help you utilise it for its
intended purpose.
The operating instructions contain important notes on how to work safely, correctly and economically with
your machine and how to avoid dangers, save on repair costs, reduce downtime and increase the reliability
and working life of the machine.
In addition to the safety regulations contained within the operating instructions, you must ensure that you
comply with the applicable regulations of your country with respect to the operation of the machine.
Put the operating instructions in a clear plastic folder to protect them from dirt and humidity and store them
near the machine. The instructions must be read by each operator prior to starting work and closely complied
with. Only persons who have been trained in the use of the machine and have been instructed about the
related dangers and risks are allowed to use the machine. The required minimum age must be met.
In addition to the safety notes contained in these operating instructions and the special regulations of your
country, the generally recognized technical rules for the operation of wood-working machines must be
observed.
Page 31