Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance - Jacuzzi Sense Installations Anweisung

Vorschau ausblenden Andere Handbücher für Sense:
Inhaltsverzeichnis

Werbung

TAP FIXTURE WITH SINGLE CONTROL
C
D
Before you use any function, you should adjust the water tempera-
ture to the value you want by doing the following:
I Turn the ring nut (G) of the deviator to the "shower head" po-
sition (A).
I Raise the lever of the mixer (M) and turn it to the right or left
until a desirable temperature is reached.
I Once the required water temperature has been reached, turn
the dial (G) to the position that indicates the function you want
to use
I Once the required water temperature has been reached, turn
the dial (G) to the position that indicates the function you want
to use
In the event of difficulty...
PROBLEM / solution
Skin
WATER IS NOT SUPPLIED FROM VARIOUS FUNCTIONS (SHOW-
ERHEAD, VERTICAL HYDROMASSAGE, ETC.).
B
• Turn on the mixer tap.
THE SHOWERHEAD PROVIDES INADEQUATE PRESSURE
• Clean the filter situated between the flexible hose and the shower
A
LITTLE WATER IS SUPPLIED FROM ALL FUNCTIONS
• Check that the plumbing system meets the pressure/capacity spec-
• Check that the thermostatic valve filter is not blocked with dirt
G
THE HYDROMASSAGE PROVIDES INADEQUATE PRESSURE
• Clean the nozzles. If this does not work, contact the Jacuzzi
DIFFICULT TO ADJUST THE WATER TEMPERATURE (MIXING)
• Check that the pressure values of the system (operating) for hot
M

Maintenance

TAP FIXTURE, SHOWER PANEL
Just dry the various components after use. If it should be neces-
sary to clean them, simply remove any impurities with a soapy
wet cloth or neutral detergent, rinse with clean water and dry.
Do not use abrasive cloths, powder detergents, acetone or
other solvents.
NOZZLES (vertical hydromassage)
SHOWER HEAD
FLEXIBLE SHOWERHEAD
These components are equipped with a scale-removal filter,
which can be cleaned with a sponge. For normal cleaning oper-
ations, see instructions for taps.
28
head.
ifications on the technical pre-installation data sheet.
and/or lime scale.
ice Centre to check the pressure and the water system capacity.
and cold water are well-balanced. If the values are different, it is ad-
visable to contact your entrusted plumber.
®
Serv-

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Sense built inSkinTwice

Inhaltsverzeichnis