Changing The Protection Grid; Changing The Protection Grid At The Back - Vorwerk Thermomix TM5 Gebrauchsanleitung

CHanGInG THE
pROTECTIOn GRID
Accessory in selected countries

Changing the protection grid at the back

Disconnect the Thermomix™ from the mains. Remove the ventilation grille
by lifting it from the clips at the recessed grip 2 . You will now see the back
of the Thermomix™ with the ventilation slits 3 . Take the protection grid
for the back 4 and insert it. It fits snugly over the ventilation slits 5 . The
ventilation grille can now be reattached. Carefully press it into the clips
until it locks entirely in place. Never operate your Thermomix™ without the
ventilation grille 6 . Check the protection grids for stains every time you
clean your Thermomix™ from the outside.
2
5
3
6
4

Changing the protection grid

49