HBM PACEline CFT Montageanleitung Seite 7

CFT
-
As commissioning engineers or service engineers, you have successfully
completed the training to qualify you to repair the automation systems.
You are also authorized to activate, to ground and label circuits and
equipment in accordance with safety engineering standards.
It is also essential to comply with the appropriate legal and safety regulations
for the application concerned during use. The same applies to the use of ac­
cessories.
Qualified personnel means personel familiar with the installation, fitting,
start-up and operation of the product, and trained according to their job.
Conditions at the place of installation
Protect the force transducer from moisture and dampness or weather
conditions such as rain, snow, ice and salt water.
To comply with EN 61326-1, para. 3.6 , the connecting leads of the CFT force
measurement chain must not be more than 30 m in length (if run in a building)
and must not exit the building.
Maintenance
The CFT piezoelectric force transducer is maintenance free.
Accident prevention
The prevailing accident prevention regulations must be taken into account,
even though the nominal (rated) force values in the destructive range are well
in excess of the full scale value.
A2529-2.0 en/de/fr
7
HBM