HBM PACEline CFT Montageanleitung Seite 5

CFT
General dangers of failing to follow the safety instructions
The CFT piezoelectric force transducer is state of the art and reliable.
The transducer complies with the state of the art and is safe to operate. If the
transducer is used and operated inappropriately by untrained personnel,
residual dangers may arise.
Anyone responsible for installing, starting up, maintaining or repairing the
transducer needs to have read and understood the operating manual and in
particular the safety instructions.
Remaining dangers
The scope of supply and performance of the force transducer covers only a
small area of force measurement technology. In addition, equipment planners,
installers and operators should plan, implement and respond to the safety en­
gineering considerations of force measurement technology in such a way as
to minimize remaining dangers. Prevailing regulations must be complied with
at all times. There must be reference to the remaining dangers associated
with force measurement technology.
Remaining dangers are indicated in these Mounting Instructions by the
following symbols:
Symbol:
Meaning: Dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements can result in death or serious physical injury.
Symbol:
Meaning: Possibly dangerous situation
Warns of a potentially dangerous situation in which failure to comply with
safety requirements could result in damage to property or some form of
physical injury.
Symbol:
Means that important information about the product or its handling is being
given.
A2529-2.0 en/de/fr
WARNING
ATTENTION
NOTE
5
HBM