Terms Of Warranty; Manufacturer's Service And Contact Address - ECOLAB Turbo SMART II Betriebsanleitung

General remarks
1.10

Terms of warranty

The manufacturer only guarantees under the following conditions:
n Assembly, connection, adjustment, maintenance and repairs must be carried out by
qualified and authorised specialists with the aid of this operating instructions and all
instructions of delivered and build in components.
n All maintenance and service intervals of all components of this installation must be
observed and documented.
The installation may only be used in accordance with this operating instruction.
n
n Only genuine replacement parts are to be used for repairs.
The pump is built according to current standards, guidelines and also tested
and certified according to the CE-Regulations.
The pump left our premises in absolutely perfect condition. To keep the
equipment in this condition and to ensure risk-free operation, all indications,
warnings and maintenance instructions contained in these operating instruction
and all instructions of the associated system components, or which are
attached on the components, must be observed.
In addition, the general warranty and service conditions of the
manufacturer apply!
1.11

Manufacturer's service and contact address

Ecolab Engineering GmbH
Raiffeisenstraße 7
D-83313 Siegsdorf, Germany
Telephone (+49) 86 62 / 61 0
Fax (+49) 86 62 / 61 166
Email: engineering-mailbox@ecolab.com
http://www.ecolab-engineering.com
Rev. 5-06.2018 10