Display Screen Symbols Explained - Kenwood CCL40 Bedienungsanleitungen

important
The tower can only be rotated in a
clockwise direction. Do not attempt to
force it in an anti-clockwise direction
as this may damage the tower.
If the food is not exiting the food
outlet, switch off and check that food
is not clogging under the disc and
the slinger plate is fitted. Clear any
trapped food before continuing to
process.
When not in use remove the Direct
Prep and replace the outlet cover.

Display screen symbols explained

hints & tips
Always use fresh food.
Do not cut food up too small. Fill the width of the
feed tube fairly full. This prevents the food from
slipping sideways during processing.
There will always be a small amount of waste left
on the disc after processing.
When grating food placed upright will come out
shorter than food placed horizontally.
Hot warning indicator
Below 60°C - no red bar
Above 60°C - solid red bar
Text display shows status information, recipes information and
error messages.
Shows temperature selected.
OFF, 30°C 180°C.
Note: In manual mode – Press the temperature button for
3 seconds during operation to switch between selected
temperature and actual temperature.
Shows the time selected in hours, minutes and seconds.
Time can be set from 5 seconds
once the Start/Stop button is pressed.
If no time is set in manual mode the time will count up.
Shows speed function has been selected.
Speeds range from 1
When the is displayed on the screen the cooking process will
continue and no further action is required.
10
8 hours and will count down
12.