Axio Observer materials Bedienungsanleitung Seite 8

ZEISS
Only specially authorized experts or service staff are permitted to open the device. The Axio
Observer may only be operated in enclosed areas.
Disconnect the device from the mains power supply before gaining access to the interior of the
device or changing the fuse.
Only use fuses for the given rated current which comply with the specifications on the fuse
holders and in this manual. Use of makeshift fuses and short-circuiting of the fuse holders are
not permitted.
Do not use portable multiple sockets. Cables are to be laid such that there is no risk of tripping,
or are to be covered.
Never disconnect the power cable while the device is in use. Use the power switch to turn the
devices off.
To ensure proper function of the device, the Axio Observer should be subjected to an annual
safety inspection. The safety checks must be carried out by an authorized ZEISS service
technician. All national safety checks should be carried out.
Clogged or covered ventilation slats may lead to heat build-up that will damage the instrument
and, in extreme cases, cause a fire. Always keep the ventilation slats clear and ensure that no
objects enter or fall into the instrument through the ventilation slats.
Dust and dirt may impair the devices' performance. The devices must be effectively protected
from such influences and covered with the dust cover when not in use. This should only be put
on once the device has been switched off and has cooled down. Otherwise this could cause a
fire.
Do not operate the supplied equipment in areas in which there is a danger of explosion or in
the presence of volatile anaesthetics or flammable solvents, such as alcohol, benzene, etc.
Only operate the device on a hard, non-flammable surface.
6
SAFETY INSTRUCTIONS
431004-8044-010
Axio Observer materials
09/2015