Mounting The Mortising Unit (Optional); Operation; Operation Instructions - Holzmann HOB 410PRO Betriebsanleitung

12.3.1

Mounting the mortising unit (optional)

 In order to mount the mortising unit
(A) on the machine, long slots (B) are
provided.
 Screw threaded pins in the intended
threaded holes of the machine.
 Lift the mortising unit with a lifting
device.
 Lift the mortising unit in the correct
position, so that the threaded pins
stick through the long slots.
 Fix the mortising unit with nuts.
13

OPERATION

Device to be operated in a perfect state only. Inspect the device visually every time it is to be used.
Check in particular the safety equipment, electrical controls, electric cables and screwed connection
for damage and if tightened properly. Replace any damaged parts before operating the device.
13.1

Operation instructions

Perform all machine settings with the machine being
Never switch the machine on while pressing the workpiece against the
HOLZMANN MASCHINEN GmbH
W A R N I N G
disconnected from the power supply!
www.holzmann-maschinen.at
A T T E N T I O N
blade shaft!
OPERATION
B
A
30
HOB 410PRO