Switch Unit; Dust Collector Plug - Holzmann HOB 410PRO Betriebsanleitung







13.2

Switch unit

ON-OFF switch:
Press green button (I): turn on
Press red button (0): turn off
EMERGENCY STOP-switch:
For emergencies push on the red cap. The machine
is switched off immediately!
To unlock, turn the cap in the direction of the arrow.
13.3

Dust collector plug

Planing:
The dust collector plug is below the planer table.
Thicknessing:
After adjusting to thicknessing, the dust collector plug has to be rotated.
Use the machine only, if there is a connection to a running exhaust system.
The dust collector plug has a diameter of 120 mm.
HOLZMANN MASCHINEN GmbH
Check the blades of wear and change if it necessary
Operate the machine only with a connected dust collector!
Check the v-belt and tighten if necessary
Replace the v-belt if it is wear of
V-belts and pulleys must not come into contact with grease, oil or
other lubricants
Loosen the v-belt if longer breaks are scheduled
www.holzmann-maschinen.at
N O T I C E
OPERATION
31
HOB 410PRO