Operation; Menu Structure; Stand-Alone Mode - EuroLite LED IP PAR Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller.

Menu structure

Mode
DMX mode
Preset colors
Automatic mode
Running speed in
automatic mode
Color mix
Dimmer
Fading
Strobe effect
Slave mode
IR remote control

Stand-alone mode

Preset colors
In the STATIC mode the device will constantly emit one of 18 preset colors.
1 Press the MENU button so many times until STATIC is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired color. Confirm with the ENTER button.
Display
8CH
4-1CH
DMX 4CH
3CH
2CH
STATIC S 01-18
Au – 1
AUTO
Au – 2
SPEED SP 01-09
R000-255
G000-255
COLOR
B000-255
W000-255
DIMMING dI 1-dI 9
FADING 00 - 99
FLASH 00 - 99
SLAVE SLAVE MODE
ON
INFRARED
OFF
21/28
8-channel mode and start address
d001-512
d001-512 4-1-channel mode and start address
d001-512 4-channel mode and start address
d001-512 3-channel mode and start address
d001-512 2-channel mode and start address
Constant lighting in one of 18 colors
Program 1: color fade
Program 2: color change
Program running speed
slow > fast
Red 0-100%
Green 0-100%
Blue 0-100%
White 0-100%
Total brightness (STATIC, AUTO
and COLOR modes)
dark > bright
Fading program with increasing speed
Strobe effect with increasing speed
Slave mode
IR remote control on
IR remote control off
Function
00117372, Version 1.0