Specific Safety Rules - Tack life TCS115A Bedienungsanleitung

SPECIFIC SAFETY RULES

WARNING: Know your circular saw. Do not plug the tool into the power
source until you have read and understand this Instruction Manual.
Learn the tool's applications and limitations, as well as the specific
potential hazards related to this tool. Following this rule will reduce the
risk of electric shock, fire, or serious injury.
Always wear eye protection. Any power tool can throw foreign objects into your
eyes and cause permanent eye damage.
ALWAYS wear safety goggles (not glasses) that comply with ANSI safety
standard Z87.1.
Everyday glasses have only impact resistant lenses. They ARE NOT safety
glasses.
Always wear eye protection. Any power tool can throw foreign objects
into your eyes and cause permanent eye damage.
ALWAYS wear safety goggles (not glasses) that comply with ANSI safety
standard Z87.1.
Everyday glasses have only impact resistant lenses. They ARE NOT safety
glasses.
WARNING: Glasses or goggles not in compliance with ANSI Z87.1 could
cause serious injury when they break.
Always keep hands out of the path of the saw blade. Avoid awkward hand
positions where a sudden slip could cause your hand to move into the path of
the saw blade.
DANGER: Keep hands away from cutting area and the blade. Keep your
second hand on the tool. If both hands are holding the saw, they cannot be
cut by the blade.
Do not reach underneath the workpiece. The guard cannot protect you from
the blade below the workpiece.
Adjust the cutting depth to the thickness of the workpiece. Less than a full
tooth of the blade teeth should be visible below the workpiece.
Never hold piece being cut in your hands or across your leg. Secure the
workpiece to a stable platform. It is important to support the work properly to
minimize body exposure, blade binding, or loss of control.
06