Tack life TCS115A Bedienungsanleitung Seite 26

3.Lift the laser cover (2) off the top of the laser assembly Fig. 13).
4.Remove the two old batteries (3).
DANGER: Never allow the laser beam to shine into a person's eyes.
Serious eye damage could result. Make sure the laser switch is OFF and
the laser is NOT pointing toward you while replacing the laser batteries and
when checking the laser function.
5.Insert two new batteries.
NOTES:
a)Use two 1.5V LR 44 batteries
b)Install the batteries with the "+" side (4) of the batteries facing the rear of the
tool.
6.Re-install the laser cover and fasten it in place with the laser cover screw.
Fig. 12
2
4
Fig. 13
3
23