1. To turn the saw ON, depress the lock-off button with your thumb.
2. While holding the lock-off button in the depressed position, squeeze the
trigger switch to start the saw.
3. Once the saw starts, release the lock-off button. The saw will remain running
until the trigger switch is released.
4. To turn the saw OFF, release the trigger switch.
NOTE: The lock-off button must be depressed again to restart the saw.
ASSEMBLY AND OPERATING
LOCK-OFF BUTTON AND TRIGGER SWITCH – cont'd
LASER ON/OFF SWITCH
This saw is equipped with a laser guidance system for more precise cutting.
DANGER: Never allow the laser beam to shine into a person's eyes.
Serious eye damage could result.
To turn the laser ON, press the left side of the laser switch (1) (Fig. 8). To turn
the laser OFF, press the right side of the laser switch.
Fig. 7
Fig. 8
19
1
2
2
1