Tack life TCS115A Bedienungsanleitung Seite 21

2
1
Fig. 6
WARNING:
For safety reasons, the operator must read the sections of this Owner's
Manual entitled "GENERAL SAFETY WARNINGS", "POWER TOOL
SAFETY", "SPECIFIC SAFETY RULES", "EXTENSION CORD SAFETY" and
"SYMBOLS" before using this circular saw.
Verify the following every time the circular saw is used:
1. Correct blade is installed for the material being cut.
2. Blade is in good condition and is properly installed.
3. Blade guard is in place and is in good working order.
4. Workpiece is properly secured.
5. Safety glasses, dust mask and hearing protection are being worn.
Failure to observe these safety rules will significantly increase the risk of
injury.
LOCK-OFF BUTTON AND TRIGGER SWITCH
The lock-off button (1) is a safety device designed to reduce the possibility of
accidentally starting the saw (Fig. 7). This button must be depressed before the
trigger switch (2) can be depressed.
18