Herunterladen Inhalt Inhalt Diese Seite drucken

Tack life TCS115A Bedienungsanleitung Seite 12

Mini laser-kreissäge
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 28
The lower guard should be retracted manually only for special cuts such as
"plunge cuts" and "compound cuts". Raise lower guard by retracting
handle and as soon as the blade enters the material, the lower guard must
be released. For all other sawing, the lower guard should operate automatically.
Always observe that the lower guard is covering the blade before placing
saw down on bench or floor. An unprotected, coasting blade will cause the
saw to walk backwards, cutting whatever is in its path. Be aware of the time it
takes for the blade to stop after the switch is released.
Never operate the saw while it is being carried to another location. The blade
guard may be open and potentially cause serious injury.
If the switch fails to turn the saw ON or OFF properly, stop using it immediately
and have the saw switch repaired.
Always allow the saw to reach full speed before beginning the cut.
SPECIFIC SAFETY RULES
ADDITIONAL SPECIFIC SAFETY RULES – cont'd
Never use the side of the blade for cutting. When making horizontal cuts,
make sure the weight of the tool is not forcing the side of the blade to do the
cutting. This will reduce the risk of kickback.
Make sure there are no nails or foreign objects in the area of the workpiece
to be cut.
Never lay workpiece on hard surfaces like concrete, stone, etc. The protrud-
ing blade may cause tool to jump.
DANGER: To avoid injury from accidental starting, always remove the
plug from the power source before making any adjustments and before
installing or removing a saw blade.
When replacing the blade, make sure the replacement blade is 3⅜" in
diameter and is rated for at least 3,500 RPM. Installing an incorrect blade will
result in possible injury and poor cutting action.
After changing a blade or making adjustments, make sure the blade clamp
screw is securely tightened. Loose blades and adjustment devices will be
violently thrown.
Never touch the blade during or immediately after use. After use the blade is
too hot to be safely touched with bare hands.
09

Werbung

Inhaltsverzeichnis
loading

Verwandte Produkte für Tack life TCS115A

Inhaltsverzeichnis