Logging On A Handset To Another Dect/Gap Base Station System Or A Third Party Base Station; Logging Off Handsets; Additional Base Stations - AUDIOLINE DECT8049 Bedienungsanleitung

9.4.3 Logging on a handset to another DECT/GAP base station system or a third
party base station
1. Prepare other base station
Follow the operating instructions indicated under 'Logging on additional handsets' of the
base station you would like to log on to.
2. Logging on the DECT8049 handset
Proceed as described above from point 2., but use the PIN code of the base station you
would like to log on to (instead of 0 0 0 0).
9.4.4

Logging off handsets

A handset can only be logged off using another handset that is still logged-on. It is therefore
not possible to carry out the logging-off procedure using the handset that is to be logged off.
1. Press the Menu display button on the mobile unit.
2. Select the Registration menu with
3. Select the De-register menu with
4. Now enter the PIN code of the base station (factory setting 0 0 0 0) and confirm with
OK.
5. Now select with
logged off and confirm with the OK button. You can abort the process by pressing
the button. If the logging-off is successful, after a few seconds you will hear a
signal tone. The mobile unit is now logged off and can no longer be used for
external and internal calls.
9.5

Additional base stations

You can increase the range of the handsets by using several base stations. In order to
make use of this effect, all base stations must be connected to a telephone socket.
Depending upon the application, you can allocate the same telephone number to each base
station or you can give the base stations different numbers. Make sure that the ranges of all
base stations overlap. Each handset must be logging on to each basis station. Please test
the range of the handsets before putting a new base station into operation.
If a handset is logged on to the base station and if the automatic base station selection is
activated (further information in this chapter), the handset is always forwarded automatically
to the nearest base station. Current calls cannot be transferred from one base station to
another.
66
- Multiple handsets -
and
and the number 1, 2, 3, 4 or 5 of the mobile unit to be
and and confirm with OK.
and confirm with OK.