Receiving Calls; Making Calls; Adjusting The Receiver Volume - AUDIOLINE DECT 7501 micro Bedienungsanleitung

4.2

Receiving calls

When a call comes through, the ringing tone will sound on the handset. The
symbol will flash in the display. Press the call button
the connection will be made. To end the call, replace the handset in the base
station or press the call button
Note: If the telephone handset stands on the base station, press the call
button
4.3

Making calls

1. Enter the required telephone number using the keypad. The numbers
pressed will be shown in the display.
2. Press the call button
Note: If you have entered a wrong number, you can delete the phone number by
repeatedly pressing the
prolonged pressing of the
You can also press the call button
entering the digits of the phone number you require your telephone will dial the
number directly. When making a call in this way, it is not possible to correct
individual digits of the phone number as described above.
4.4

Adjusting the receiver volume

If you want to change the receiver volume on the handset you have four volume
steps available.
Press several times the
selected volume is indicated in the display.
All manuals and user guides at all-guides.com
- Operation -
on the handset.
first.
and the required connection will be made.
button. The number can be deleted completely by
button.
first and thus obtain a dialling tone. By
button to change the receiver volume. The
on the handset and
39