PeakTech 1070 Bedienungsanleitung Seite 33

3.6. Diode
Diode: Testing voltage approx. 2,4 V, current 1,5 mA,
indicate forward diode approx. value.
3.7. Temperature
Range
0...1000°C
4. Operating instruction
Attention! For reasons of safety the maximal permissible
input voltage towards earth (ground) it isn't allowed to be
crossing over 250 V. At disregard there is a risk of injury
(electrical shock) and the risk of damaging of the internal
circuits.
Before measuring, check the instrument and the test leads
for possible damaging.
4.1. Voltage measurement (DC V)
1. Connect red test lead to "V//mA" jack, black test lead
to "COM" jack.
2. Set the FUNCTION switch to the desired V DC position.
If not sure, set to the highest range.
3. Connect the test leads across the source or load under
measurement.
Resolution Accuracy
 (2%  3 dgt.)
1° C
-32-