PeakTech 1070 Bedienungsanleitung Seite 25

* To avoid electric shock, do not operate this product in
wet or damp conditions. Conduct measuring works only
in dry clothing and rubber shoes, i. e. on isolating mats.
* Never touch the tips of the test leads or probe.
* Comply with the warning labels and other info on the
equipment.
* The measurement instrument is not to be to operated
unattended.
* Always start with the highest measuring range when
measuring unknown values.
* Do not subject the equipment to direct sunlight or
extreme temperatures, humidity or dampness.
* Do not subject the equipment to shocks or strong
vibrations.
* Do not operate the equipment near strong magnetic
fields (motors, transformers etc.).
* Keep hot soldering irons or guns away from the
equipment.
* Allow the equipment to stabilize at room temperature
before taking up measurement (important for exact
measurements).
* Do not input values over the maximum range of each
measurement to avoid damages of the meter.
* Do not turn the rotary function switch during voltage or
current measurement, otherwise the meter could be
damaged.
* Use caution when working with voltages above 35V DC
or 25V AC. These Voltages pose shock hazard.
-24-