Archiving Of The Process Data - Gesipa TAURUS 1 C Bedienungsanleitung

GB
By pressing the independent operation of the tool can be started. The setting process
monitoring is then carried out according to the active profile list starting with the blind rivet location 1 of
the setting sequence. If the -button is pressed, the software will generate a new connection
with the processing tool, and other processing tools can be configured. Process evaluation is represented
by means of the LED on the tool as in the operating mode PC. The process data in Independent operati-
on are saved according to the established settings according to chapter 4.4.

10.4 Archiving of the Process Data

The process data saved in the tool or on a computer can be read out, visualized and statistically analyzed
by means of the operating software. To do so, the -button in the area Archiving of the start
screen must be actuated. Now the software will read out the process data saved in the tool and repre-
sents a calendar that provides an overview of the process data saved in the processing tool, illustration
30.
Illustration 30: Representation of process data in the calendar
66