Work Capacity; Technical Data; Equipment/Accessories - Gesipa FireFox 2 Betriebsanleitung

• Disconnect the device from the compressed air network prior to carrying out any
maintenance work to the blind rivet nut setting tool, changing threaded mandrels or when
not in use.
• When working with the tool, always wear protective goggles. Personal protection like clothes,
gloves, safety helmet, ear protection and anti-fall protection are highly recommended.
• When depositing the blind rivet setting tool, make sure that it cannot fall.
• Repair work must be carried out by skilled personnel. Use genuine parts for repair at all
times. In case of doubt, always send the complete blind rivet nut setting tool back to the
supplier or to GESIPA
• Avoid excessive contact with hydraulic oil. If irritation of the skin occurs, wash affected skin
parts thoroughly with water!
• Dispose of hydraulic waste oil according to current regulations.
2.3

Work capacity

The blind rivet nut setting tool is designed for setting blind rivet nuts and blind rivet bolts M3 to
M10 made of any kind of material, as well as M12 in aluminium and steel.
2.4

Technical data

Weight:
Working pressure:
Gun stroke:
Hose connection:
Compressed air consumption: c. 2 - 4 litre/setting process (dependent on nut size)
Setting force at 5 bar:
Hydraulic oil:
Noise emission Lpa:
Vibration:
Compressed air quality:
2.5

Equipment/accessories

Threaded mandrels
and nosepiece:
Tool:
Suspension Loop:
Hydraulic oil:
.
®
2.4 kg
5 to 7 bar
max. 10 mm
Ø 6 mm (1/4")
18.5 kN
ca. 30 ml (ISO VG 32 to 46)
75 dB, Measurement uncertainty K=3dB
< 2.5 m/s², Measurement uncertainty K=1.5 m/s²
Filtered
M4, M5, M6 and M8
Hexagon screw driver SW3
2 x double open-end spanner SW24/27
Extendable from device top
1 bottle of hydraulic oil 100 ml
1 oil filling container
GB
19