Inhaltsverzeichnis
Werbung
SPARE PARTS LIST
FERM NR
DESCRIPTION
500266
LOCKING HANDLE
500267
LOCKING KNOB
500268
BLADE GUARD LOCK
500269
FLANGE (SET)
MSA1019
SAW BLADE, 305MM, CARBIDE TIPS
500270
SAW BLADE GUARD COMPLETE
500271
SLIDING BAR BLADE GUARD
500272
SAW GUIDE COMPLETE
500273
INLAY PLATE
500274
LOCKING ROD WORKTABLE
500275
LOCKING KNOB WORKTABLE
500276
WORKPIECE CLAMP
500277
CARBON BRUSH (SET)
500278
CAP CARBON BRUSH
500279
SWITCH
58
REF NR
1+2
MITRE SAW MACHINE
9 TILL 12
29 TILL 31, 36+37
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
47, 49 TILL 51
48
52 TILL 59
60 TILL 62
33(2X), 63(2X), 64(2X), 65
CONTENTS:
70
1. Machine information
2. Safety
74
3. Mounting accessories
75
4. Operation
20, 85, 91 TILL 98
5. Service & Maintenance
101
1. MACHINE INFORMATION
102
103
INTRODUCTION
The mitre saw machine is designed for sawing wood and
woody pieces of work.
TECHNICAL SPECIFICATION
Voltage
Capacity
Machine class
Revolutions, not under load | 4800 rpm
Saw blade measurement
Angle for mitring
Angle for bevelling
Mitre sawing capacity:
Mitre 0º, Bevel 0º
Mitre 45º, Bevel 45º
Mitre 45º, Bevel 0º
Mitre 0º, Bevel 45º
Weight
Lpa (sound pressure)
Lwa (acoustic capacity
Vibration level
LIST OF PARTS
1. Handgrip with switch
2. Unlock button
3. Motor housing (carbon brush cover)
4. Blade protective cover
5. Cutting head unlock button
6. Extension pieces (left and right)
7. Clamp
8. Clamp holes
9. Knob for setting the sawing angle
10. Saw blade lock
11. Rotary knob for mitre sawing
12. Dust bag
13. Stop
14. Screw
15. Saw blade bolt
Ferm
Ferm
For your own safety, carefully read these
instructions for use before using the machine.
| 230 V ~
| 2000 W
| II (double insulated)
| 305x25.4x3.0 mm
| 45º (left and right)
| 45º (only left)
|
| 79 x 195 mm
| 42 x 135 mm
| 70 x 135 mm
| 48 x 135 mm
| 23 kg
| 95 dB(A)
| 108 dB(A)
| 9.88 m/s
2
16. Flange
17. Hood
18. Scale for bevelling
PACKAGE CONTENTS
1 Mitre saw
1 Dust bag
1 Clamp
2 Extension pieces + 2 clamps
4 Rubbers
1 Key for changing the saw blade
1 Instructions for use
1 Safety instructions
1 Guarantee card
Check the machine, loose parts and accessories for any
transport damage.
2. SAFETY
When using the machine, always carefully follow
the safety precautions supplied and the safety
instructions given below.
LIST OF SYMBOLS
The following pictograms are used in these instructions
and on the machine itself:
CE Conforms to the applicable European safety
standards
Class II equipment – doubly insulated – the plug
does not have to be earthed
Danger of bodily injury or material damage.
Read the instructions
Keep bystanders at a distance
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Wear eye and ear protectors
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
BEFORE EACH USE OF THE SAW
Check the machine. If any part of the machine is missing,
bent or in any other way unusable, or when an electrical
defect occurs, turn the machine off and take the plug out
of the socket. Replace all missing, damaged or defective
parts before using the machine again.
To fix the saw blade in the slot and to prevent the piece
of work from moving, follow the instructions below.
3
Werbung
Inhaltsverzeichnis
