Inhaltsverzeichnis; Machine Data - Ferm TSM1032 Originalbetriebsanleitung

TABLE SAW 800W - 200MM
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2-4
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always func­
tions properly. The operating instructions
and the accompanying documentation
must be kept in the vicinity of the device.
Applications
You may use the saw bench to saw workpieces
with a maximum thickness of 45 mm.
Contents
1. Machine data
2. Safety instructions
3. Assembly instructions
4. Operation
5. Maintenance

1. MAChinE dATA

Technical specifications
Voltage
Input power
Speed, no load
Saw blade dimensions
Max.cutting depth 90º
Max.cutting depth 45º
Diam. dust extraction
Cutting angle
Machine weight
Lpa Sound pressure level
Lwa Sound power level
Vibration frequency
4
Load factor
A load factor of S2 = 10 min (intermittent
periodic duty) means that you may operate the
motor continuously at its nominal power level
for no longer than the time stipulated on the
specifications label (10 minutes ON period). If
you fail to observe this time limit the motor will
overheat. During the OFF period the motor will
cool again to its starting temperature.
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 61029; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
- using the tool for different applications, or with
- the times when the tool is switched off or when
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Contents of the package
1 Saw bench
1 Push stick
1 Mitre guide
1 User manual
1 Warranty card
1 Safety instructions
230 V, 50 Hz
Check the machine, loose parts and accessories
800 W (S2 = 10 min)
for transport damage.
2950/min
Ø200 x 2.4 x Ø16 mm
Product information
45 mm
Fig.1
27 mm
1. Table surface
40 mm
2. Protective hood
0-45°
3. Push stick
11.3 kg
4. Saw blade
96.6+3 dB(A)
109,6+3 dB(A)
5. Riving knife
< 2.5 m/s
2
6. Insert piece
7. On/off switch
different or poorly maintainted accessories,
may significantly increase the exposure level
it is running but not actually doing the job, may
significantly reduce the exposure level