Inhaltsverzeichnis; Machine Data; Safety Instructions - Ferm FRS-600D Gebrauchsanweisung

RECIPROCATING SAW
The numbers in the following text refer to
the drawing on page 2
For your own safety and for the safety
of others, please read these
instructions carefully before using this
appliance. It will help you understand
your product more easily and avoid
unnecessary risks. Keep this
instruction manual in a safe place for
future use.
Contents:
1. Machine data
2. Safety instructions
3. Use
4. Service & maintenance

1. MACHINE DATA

Technical specification
Mains voltage
Frequency
Power input
No load speed
Saw stroke
Weight
Lpa (sound pressure)
Lwa (acoustic capacity)
Vibration
Max. saw capacity (wood)
Product information
Fig. 1
1 On/off switch
2 Handgrip
3 Locking button
4 Footplate unlocking lever
5 Quick coupling system
6 Footplate
7 Saw blade for wood
8 Saw blade for metal
Ferm
RSM1008 Ma # 0810-17.1 FC.indd 3

2. SAFETY INSTRUCTIONS

These instructions use the following images:
| 230 V~
| 50 Hz
| 600 W
| 0-2500/min
| 18 mm
| 2.75 kg
| 87.5 dB(A)
| 100.5 dB(A)
| 18.503 m/s
2
| 115 mm
Special safety instructions
•
•
•
Read instructions carefully
In accordance with essential applicable
safety standards of European
directives
Class II machine - Double insulation
- You don't need any earthed plug.
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the
mains electricity in the case that the
cord gets damaged and during
maintenance
The revolutions of the machine can be
electronically regulated.
Wear ear and eye protection
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
Check workpieces for any protruding nails
etc. and remove these.
Keep your hands away from the surface to
be cut.
Hearing protectors should be worn.
GB
3
10/17/08 3:30:32 PM