Faults - Pilz PKB-M Bedienungsanleitung

www.dplusa.fr

Faults

Faults
During operation, messages appear as clear text on the LCD display. The
following list gives some of the faults, their possible causes and how they
can be recitfied.
If the fault is removed it may be necessary to reset the message manuallly
(see error reset, E-Reset). Press any key.
18
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DETECTION ET AUTOMATISME - 17 Rocade de la Croix St Georges - 77600 BUSSY ST GEORGES - Tél : 01.64.66.90.00 - Fax : 01.64.66.98.01 - mail : infos@dplusa.fr
Fault, Message Possible Causes
LCD cannot U
B
be read
LCD cannot Contrast fault.
be read
Error Various
E-PWR Voltage at Kl.
L1 and L2 missing is present
Brake: Fault Motor or
heatsink temp.
too high
Aid
fault. Check connection
terminals L1/A1-L2
Set contrast (ESC and
arrow key)
Go through the text in the brake
interrupt menu (arrow keys)
Check whether link L2-A2
Leave to cool.
PKB-M, PKB-MS Operating Manual