Faults - Pilz PKB-M Bedienungsanleitung

www.dplusa.fr

Faults

Faults
18
DETECTION ET AUTOMATISME - 17 Rocade de la Croix St Georges - 77600 BUSSY ST GEORGES - Tél : 01.64.66.90.00 - Fax : 01.64.66.98.01 - mail : infos@dplusa.fr
Downloaded from www.Manualslib.com
During operation, messages appear as clear text on the LCD display. The
following list gives some of the faults, their possible causes and how they
can be recitfied.
Fault, Message
LCD cannot
be read
LCD cannot
be read
Error
E-PWR
Brake: Fault
If the fault is removed it may be necessary to reset the message manuallly
(see error reset, E-Reset). Press any key.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
manuals search engine
Possible Causes Aid
U fault. Check connection
B
terminals L1/A1-L2
Contrast fault. Set contrast (ESC and
arrow key)
Various Go through the text in the brake
interrupt menu (arrow keys)
Voltage at Kl. Check whether link L2-A2
L1 and L2 missing is present
Motor or Leave to cool.
heatsink temp.
too high
PKB-M, PKB-MS Operating Manual