www.dplusa.fr
Operation
PILZ
Start display pre-installed ex-works
PKB-M
PKB-MS: version with automatic standstill detection
To save a different menu as the start display, select the menu using the
arrow keys and then press ESC and ENTER simultaneously. Confirm the
displayed message
Input menus
I-Brake
Braking current - set value
XX.XAYYY
XX.X
YYY
To switch between internal and external, go to input mode and press
ENTER and UP or DOWN simultaneously.
t-Brake
Braking time - set value
XXXs YYY
XXX
INF:
YYY
To switch between external and internal, go into the input mode and press
ENTER and UP or DOWN simultaneously.
setting
Settings
Data
If nothing else is recorded, settings are only possible with password
protection > Level0.
Password
Password
LevelX
X
Level0
Level1
In order to give the 4-digit password, switch to input mode and select the
characters using the arrow keys. Pressing ENTER moves you to the next
position.
10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DETECTION ET AUTOMATISME - 17 Rocade de la Croix St Georges - 77600 BUSSY ST GEORGES - Tél : 01.64.66.90.00 - Fax : 01.64.66.98.01 - mail : infos@dplusa.fr
N Save Y
with ENTER.
Menu
Braking current in amps
int: value to be set via keys
ext: value from remote control potentiometer
Braking time in seconds
Braking time infinity
int: value to be set via keys
ext: value from remote control potentiometer
Current password protection
Only the set value setting for the braking current and braking
time is possible (without password)
increased setting options (password: PILZ)
PKB-M, PKB-MS Operating Manual