Pilz PKB-M Bedienungsanleitung Seite 41

www.dplusa.fr
Safety
Safety times
Times
tv1
XXX0
XXX0ms
tv1
tv2
tv2
XXX0ms
tv3
tv4
Regulat.
Control data
Data
P-value
Proportional factor
XXX
XXX
I-value
Integrated time
XXX
XXX
Boost-V
Additional boost
XXX
XXX
Boost-L
Limits for additional boost
XXX
XXX
Example: With a preset set value of 10 A and a limit of 20 %, the additio-
nal boost is active as long as the real braking current is smaller than 8 A
or greater than 12 A.
Ramp
Control ramp time
XXX0ms
XXX
When braking starts the current set value goes up from 0 A to the set
value within the ramp time (soft brake start).
PKB-M, PKB-MS Operating Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DETECTION ET AUTOMATISME - 17 Rocade de la Croix St Georges - 77600 BUSSY ST GEORGES - Tél : 01.64.66.90.00 - Fax : 01.64.66.98.01 - mail : infos@dplusa.fr
Safety times in milliseconds
Time between the motor contact de-energising and the brake
contact energising
Time between energising the brake contactor and firing the
thyristor
Time between firing the thyristor and the brake contactor de-
energising
Time between the brake contactor de-energising and enabling
the motor contactor
Control boost
Off: control switched off (current is no longer controlled!)
Control integration time in milliseconds
Control additional boost
percentage limits for the activation of the additional boost
(related to the control set value)
Ramp time of the control in milliseconds x 10
Boost: The control starts with the preset firing point.
11